Posted in

Which machinery parts should I keep as spares?

If you run a machine shop, a construction site, a farm, or any business that relies on heavy or light machinery, you’ve probably stared at a shelf full of random spare parts at some point and wondered: “Do I really need this? I paid good money for it, but I never used it.” As a machinery parts supplier who’s worked with hundreds of businesses over the last 12 years, I can tell you that keeping spares right is way more important than just hoarding every part that comes your way. Too many companies overbuy spares that collect dust, take up space, and tie up cash they could use for other needs. Too few keep the ones that break the most, and end up stuck waiting 3+ days for a replacement when a machine goes down. That’s why I’m breaking down exactly which parts are worth keeping as spares, and which you can skip—no overcomplicated jargon, just real stuff I’ve seen work (and fail) in the field. Machinery Parts

First, let’s start with the most obvious but most ignored group: wear parts that are non-custom and fail constantly. I’m talking about the parts that move, rub, spin, or get exposed to dust, dirt, or moisture every single time your machine runs. Let’s take a skid-steer loader as an example: your bucket teeth, hydraulic hoses, and air filters aren’t luxury parts—they’re the ones that get replaced every 50 to 200 hours, depending on what you’re working with. I once worked with a landscaping crew that kept only 1 set of bucket teeth and no spare hoses. One day, a hose blew mid-job, and they had to rent a smaller loader for 2 days while they waited for a $40 hose to ship. That rental cost them $1,200—way more than just having two spare hoses on hand.

Now, not all wear parts are equal, so stick to the ones that are universal for your machine model. If you run a Caterpillar 320 excavator, don’t bother with a custom undercarriage roller for a 2021 model unless you run that exact 320 every single day. But do keep 2-3 sets of idlers, a set of track shoes, and 2 short hydraulic hose assemblies for the most common attachments (buckets, breakers) that you use. Air filters and fuel filters are another no-brainer—they’re cheap, take up almost no space, and if you run a dusty job site, you’ll go through one every couple weeks. I always tell small operations to keep 2 of each filter set for their main machine; big shops can keep 5, since they go through them faster.

Next up: electrical and hydraulic components that don’t need programming and fail without warning. This is the group that trips people up because it’s not just the big, expensive parts. Take sensor switches, for example—those little things that tell your machine if a door is closed, or if hydraulic pressure is too high. I’ve seen a 2024 John Deere tractor shut down completely because a $15 limit switch burned out, and the parts department was backlogged 10 days. They ended up having to pay a local tech $800 to come out and troubleshoot, plus lose 5 days of planting. That’s a way bigger cost than the $15 for a spare switch, and it takes up zero room in your parts bin. Same goes for relays, fuse blocks, and simple control knobs—no special tools needed to swap these out, and they’re cheap enough to keep a few on hand.

Now, hydraulic solenoid valves? Wait, that’s a gray area. If your machine has a single function solenoid (like for a boom lock), that’s worth keeping one spare. But if your machine has a bank of 10+ solenoids for different attachments, don’t stock all of them. Stock the ones that are used most often—like the one that controls bucket tilt on an excavator. The rest can be ordered in when they break, since they’re easy to swap out for a tech who has a programmable tool, and they’re not a showstopper if one goes down.

Then there’s the group I call “mission-critical core parts that only take 1-2 spares max.” These are the parts that if they break, your machine is dead, and you can’t run business at all. But here’s the catch: you don’t need a warehouse full of these, just 1 or 2, and only if you use that machine every single day. Let’s think about engine components: a timing belt? If your machine uses an interference engine, and the belt breaks, you’re looking at a $5,000 rebuild. So yes, keep 1 spare timing belt, even if it’s only for your 1 main excavator. But a spark plug for a small generator? That’s a wear part, not a core part—already covered in the filters group. Another example: drive sprockets for a skid-steer. If your sprocket breaks, your tracks fall off, and you’re done. So 1 spare sp makes sense, especially if you’re on a remote farm or job site where shipping takes 4+ days.

But here’s the rule for mission-critical parts: don’t overstock. I worked with a construction company that had 6 spares for a core drive shaft for their flagship loader. The drive shaft for that model only breaks once every 7 years. They spent $12,000 on spares that are still in their original packaging, sitting on a shelf. That’s cash they could have used for a new tool, or to cover unexpected work delays. So 1 or 2 max for core parts, only for your most frequently used machines.

Now, which parts should you absolutely skip? This is where most people waste the most money. First, any custom parts for a one-off machine build or a machine you only use once a year. If you own a old farm tractor you only use for hay season every summer, don’t stock spares for it unless you can get them locally. Chances are, a local mechanic can get a replacement in 2 days, and you won’t have to store a random part for 11 months. Second, any electronic parts that need special programming. I’m looking at you, ECMs (engine control modules) and navigation screens. If your ECM breaks, a tech has to hook it up to a factory tool to program it to your machine’s serial number—you can’t just swap in a random spare you ordered online. It’s cheaper and faster to order a new one when it breaks, because programming costs are built into the new part, and you don’t have to waste cash on a spare ECM that might never get used. Third, generic parts that are super cheap and easy to get locally. Bolts, nuts, gaskets, and small clamps? Your local hardware store has these, same brand same part number, for cheaper than you can order them as a spare. No need to stock a bin of random bolts—grab them as you need them.

Wait, I should mention one more thing: if you run a fleet of machines, adjust your spares based on use. If you have 5 excavators on a big construction site, you can keep more spares because you have the space, and downtime on any machine hits your profit. If you have 1 or 2 machines, you want to be tight with storage, so only keep the absolute most common parts. I also do quick check-ins with my regular customers every 6 months to adjust their spares list—if someone added a new forestry attachment to their fleet, I tell them to add spare hoses and a limit switch for that attachment. It’s a small tweak that saves them from big headaches.

At the end of the day, spares are a balance between cost and convenience. You don’t want to be the guy who panics when a hose breaks and waits a week for a part, but you also don’t want to be the guy with a closet full of unused parts that tie up cash. If you’re not sure what spares make sense for your machines, feel free to reach out to us—we’ve helped hundreds of shops and farms build a spares list that fits their exact operations, no fluff, no overpriced parts, just what you need to keep your machines running.

Stamped Brackets References:

  1. Machinery Lubrication Magazine, "Optimal Spare Parts Strategy for Heavy Equipment Fleets", 2022
  2. National Association of Construction Equipment Dealers, "Small Business Spare Parts Management Guide", 2021
  3. Agricultural Equipment Technology Association, "Wear Part Replacement Metrics for Farm Machinery", 2023
  4. International Journal of Industrial Maintenance, "Cost-Benefit Analysis of Critical Spare Parts Stocking", 2020

Hangzhou Zhalihui Import And Export Co., Ltd.
We are one of the most experienced machinery parts manufacturers and suppliers in China, specialized in providing high quality customized products. Please feel free to buy discount machinery parts in stock here from our factory. Contact us for quotation.
Address: Room 2801, Building 2, Taifu Plaza, No.17, Tonghui Middle Road, Chengxiang Street, Xiaoshan, Hangzhou, Zhejiang
E-mail: Chars_1979@hotmail.com
WebSite: https://www.zhalihui.com/